-
libatomic_ops-7.4.2-4.lbn19.x86_64
Provides implementations for atomic memory update operations on a
number of architectures. This allows direct use of these in reasonably
portable code. Unlike earlier similar packages, this one explicitly
considers memory barrier semantics, and allows the construction of code
that involves minimum overhead across a variety of architectures.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
libattr-2.4.46-10.fc19.armv6hl
This package contains the libattr.so dynamic library which contains
the extended attribute system calls and library functions.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
libattr-2.4.47-10.lbn19.x86_64
This package contains the libattr.so dynamic library which contains
the extended attribute system calls and library functions.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
libavc1394-0.5.3-13.fc19.armv6hl
The libavc1394 library allows utilities to control IEEE-1394 devices
using the AV/C specification. Audio/Video Control allows applications
to control devices like the tape on a VCR or camcorder.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
libavc1394-0.5.3-13.fc19.x86_64
The libavc1394 library allows utilities to control IEEE-1394 devices
using the AV/C specification. Audio/Video Control allows applications
to control devices like the tape on a VCR or camcorder.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
libbabeltrace-1.2.1-3.lbn19.x86_64
This project provides trace read and write libraries, as well as a trace
converter. A plugin can be created for any trace format to allow its conversion
to/from another trace format.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
libbasicobjects-0.1.0-17.fc19.armv6hl
Basic object types
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
libbasicobjects-0.1.1-27.lbn19.x86_64
Basic object types
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
libbcm2835-1.3-2.rpfr18.armv6hl
This is a C library for Raspberry Pi (RPi). It provides access to GPIO and other
IO functions on the Broadcom BCM 2835 chip, allowing access to the GPIO pins on
the 26 pin IDE plug on the RPi board so you can control and interface with
various external devices.
It provides functions for reading digital inputs and setting digital outputs.
Pin event detection is supported by polling (interrupts not supported).
It is C++ compatible, and installs as a header file and non-shared library on
any Linux-based distribution (but clearly is no use except on Raspberry Pi or
another board with BCM 2835).
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
libblkid-2.22.2-7.fc18.armv6hl
This is block device identification library, part of util-linux.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
