-
rabbitmq-server-3.6.1-2.lbn19.noarch
RabbitMQ is an implementation of AMQP, the emerging standard for high
performance enterprise messaging. The RabbitMQ server is a robust and
scalable implementation of an AMQP broker.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
radvd-1.9.2-3.fc19.armv6hl
radvd is the router advertisement daemon for IPv6. It listens to router
solicitations and sends router advertisements as described in "Neighbor
Discovery for IP Version 6 (IPv6)" (RFC 2461). With these advertisements
hosts can automatically configure their addresses and some other
parameters. They also can choose a default router based on these
advertisements.
Install radvd if you are setting up IPv6 network and/or Mobile IPv6
services.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
rarian-0.8.1-9.fc19.x86_64
Rarian is a documentation meta-data library that allows access to documents,
man pages and info pages. It was designed as a replacement for scrollkeeper.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
rarian-0.8.1-9.fc19.armv6hl
Rarian is a documentation meta-data library that allows access to documents,
man pages and info pages. It was designed as a replacement for scrollkeeper.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
rarian-compat-0.8.1-9.fc19.armv6hl
This package contains files needed to maintain backward-compatibility with
scrollkeeper.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
rarian-compat-0.8.1-9.fc19.x86_64
This package contains files needed to maintain backward-compatibility with
scrollkeeper.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
raspberrypi-config-0.5-1.rpfr18.noarch
Boot configuration files for the Raspberry Pi computer. These files control
kernel options, video modes, and memory.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
raspberrypi-firstboot-mod-18.1-4.rpfr18.armv6hl
The firstboot mod utility runs after installation. It guides the user through
a series of steps that allows for easier configuration of the machine.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
raspberrypi-headless-18-3.rpfr18.armv6hl
Headless mode is used to obtain an ip-address through dhcp or you can assign a static ip-address if you desire.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
raspberrypi-kernel-3.12.0-5.20131106git839f349.rpfr19.armv6hl
Kernel for the Raspberry Pi device. The kernel is installed into
/boot/kernel.img and modules are installed into /lib/modules. There is
no initrd support at present.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
