-
SOAPpy-0.11.6-10.fc12.noarch
The goal of the SOAPpy team is to provide a full-featured SOAP library
for Python that is very simple to use and that fully supports dynamic
interaction between clients and servers.
Located in
LBN
/
…
/
Zenoss 4
/
BastionLinux 13
-
ZenPacks.Firestar.CiscoASA-4.2.5_2.1.2-1.lbn13.noarch
This ZenPack is for Cisco Adaptive Security Appliance (ASA), and provides CPU utilization, free memory available, active VPN tunnels, RAS sessions, and IKE dropped packets. It also includes all the necessary MIB configurations to handle incoming SNMP trap events from these appliances.
Located in
LBN
/
…
/
Zenoss 4
/
BastionLinux 13
-
ZenPacks.Nova.Cisco.Catalyst-4.2.5_1.0-1.lbn13.noarch
SNMP-based modeling and monitoring for Catalyst Switch devices running CatOS
Located in
LBN
/
…
/
Zenoss 4
/
BastionLinux 13
-
ZenPacks.Nova.Cisco.Mibs-4.2.5_1.1-1.lbn13.noarch
This ZenPack consists of all the publicly available (and edited to be loadable into Zenoss) MIBs
for Cisco devices. The MIBs may be used for translating SNMP traps.
Located in
LBN
/
…
/
Zenoss 4
/
BastionLinux 13
-
ZenPacks.PlixerInternational.Scrutinizer-4.2.4_1.2-1.lbn13.noarch
The Scrutinizer ZenPack provides direct integration between Zenoss and Scrutinizer. This
integration allows network engineers to quickly switch between viewing the event details
in Zenoss and the detailed network traffic analysis view in Scrutinizer. Network engineers
need to quickly find and resolve network performance bottlenecks before they impact
customers and end-users. One of the most effective ways to diagnose network performance
problems is by analyzing NetFlow data.
Located in
LBN
/
…
/
Zenoss 4
/
BastionLinux 13
-
ZenPacks.RomanTykhonov.OracleDB-4.2.5_2.0-2.lbn13.noarch
With SNMP Trap destination setup in Oracle Enterprise Manager it is the best way to monitor many Oracle Single Instance/RACs for FREE. (if you have Oracle Standard Edition - Perfomance Tab have to be disabled due to Standard Edition Licence Agreement)
Located in
LBN
/
…
/
Zenoss 4
/
BastionLinux 13
-
ZenPacks.TwoNMS.PrinterMIB-4.2.5_2.0.0-2.lbn13.noarch
This ZenPack monitors printers supporting the new RFC3805 PrinterMIB (supersedes
RFC1759). Version 2.0.0 creates separate components for toners, supplies and input
trays.
In case you don't see the Printer components then try deleting the printer + adding
it directly to the /Printer/PrinterMIB tree.
Located in
LBN
/
…
/
Zenoss 4
/
BastionLinux 13
-
ZenPacks.ZenSystems.ApcUps-4.2.4_1.2-6.lbn13.noarch
The ZenPack has the following Device Class
/Devices/Server/Windows
Components are:
ApcUpsBattery which has details for:
Various elements of battery status
Modeler plugins are:
ApcUpsDeviceMap
Gathers Hardware and Software manufacturer and product
Serial number
Total number of battery packs
Number of bad battery packs
Basic output status
ApcUpsBatteryMap
Gathers battery data for status
Time on battery
Battery last replacement date
Battery replacement indicator
Device template ApcUps provides device-level performance information:
Data Sources
Voltage
Current
Remaining capacity and time
Temperature
Thresholds
Low capacity
Low time remaining
High temperature
Graph Definitions
Voltage
Current
Remaining capacity
Remaining time
Temperature
Device template ApcUpsInsAndOuts provides specific input / output performance information:
Data Sources
Input frequency and voltage
Output frequency, voltage, load and current
Thresholds
High load
Graph Definitions
Input frequency and voltage
Output frequency, voltage, load and current
A separate APC UPS Information menu delivers tabular and graphical information for the overall device
Located in
LBN
/
…
/
Zenoss 4
/
BastionLinux 13
-
ZenPacks.atelepin.cbCiscoQOS-4.2.5_1.2-1.lbn13.noarch
Background
==========
This project is a Zenoss extension (ZenPack) primarily intended for ISPs which extensively use different QoS on their network (like MPLS), and need to know statistics by each class.
About Cisco Base QOS on Cisco site
This is prerelease but all main functionality work. Almost think i need change or add write in the code as TODO or FIXME
Overview
========
Because ServicePolicy bound to Interface (IpInterface), installation create additional relation between cbServicePolicy and IpInterface. ZenPack contain automated modeler which grab QOS Object configuration from device. From this configuration modeler create particular class instance and create hierarchy of that objects (see more about nested object in cisco site).
In this release i collect only two statistic item PostPolicyBitRate and PostPolicyDropRate. From code point of view each statistic item is different component, but from user point of view, this item belong to cbServicePolicy and statistics should be visible as single item (for example on single graph). In this case cbServicePolicy work not only as container but also provide internal API to gather statistic from his child.
Located in
LBN
/
…
/
Zenoss 4
/
BastionLinux 13
-
ZenPacks.chudler.GoogleAppEngine-4.2.5_1.0-1.lbn13.noarch
With this ZenPack you can monitor the status of your Google AppEngine applications.
It provides:
All Quota statistics (allowances, percent used, and raw used).
Application status (version deployed)
Monitoring of multiple google accounts
Automatic detection of new quotas types
Automatic detection of new applications and changes to existing applications
Located in
LBN
/
…
/
Zenoss 4
/
BastionLinux 13
