-
ndctl-75-1.fc36.x86_64
Utility library for managing the "libnvdimm" subsystem. The "libnvdimm"
subsystem defines a kernel device model and control message interface for
platform NVDIMM resources like those defined by the ACPI 6+ NFIT (NVDIMM
Firmware Interface Table).
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 36
-
ndctl-libs-75-1.fc36.x86_64
Libraries for ndctl.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 36
-
nebula-1.9.5-2.lbn36.x86_64
A scalable overlay networking tool with a focus on performance, simplicity and
security.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 36
-
net-snmp-5.9.3-1.lbn36.x86_64
SNMP (Simple Network Management Protocol) is a protocol used for
network management. The NET-SNMP project includes various SNMP tools:
an extensible agent, an SNMP library, tools for requesting or setting
information from SNMP agents, tools for generating and handling SNMP
traps, a version of the netstat command which uses SNMP, and a Tk/Perl
mib browser. This package contains the snmpd and snmptrapd daemons,
documentation, etc.
You will probably also want to install the net-snmp-utils package,
which contains NET-SNMP utilities.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 36
-
net-snmp-agent-libs-5.9.3-1.lbn36.x86_64
The net-snmp-agent-libs package contains the runtime agent libraries for shared
binaries and applications.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 36
-
net-snmp-libs-5.9.3-1.lbn36.x86_64
The net-snmp-libs package contains the runtime client libraries for shared
binaries and applications.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 36
-
net-snmp-utils-5.9.3-1.lbn36.x86_64
The net-snmp-utils package contains various utilities for use with the
NET-SNMP network management project.
Install this package if you need utilities for managing your network
using the SNMP protocol. You will also need to install the net-snmp
package.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 36
-
net-tools-2.0-0.61.20160912git.fc36.x86_64
The net-tools package contains basic networking tools,
including ifconfig, netstat, route, and others.
Most of them are obsolete. For replacement check iproute package.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 36
-
netavark-1.0.3-3.fc36.x86_64
OCI network stack
Netavark is a rust based network stack for containers. It is being
designed to work with Podman but is also applicable for other OCI
container management applications.
Netavark is a tool for configuring networking for Linux containers.
Its features include:
* Configuration of container networks via JSON configuration file
* Creation and management of required network interfaces,
including MACVLAN networks
* All required firewall configuration to perform NAT and port
forwarding as required for containers
* Support for iptables and firewalld at present, with support
for nftables planned in a future release
* Support for rootless containers
* Support for IPv4 and IPv6
* Support for container DNS resolution via aardvark-dns.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 36
-
netbox-4.3.4-1.lbn36.noarch
NetBox is an IP address management (IPAM)
and data center infrastructure management (DCIM) tool.
Initially conceived by the network engineering team at DigitalOcean,
NetBox was developed specifically to address the needs of network
and infrastructure engineers. It is intended to function
as a domain-specific source of truth for network operations.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 36
