-
cups-libs-2.4.2-5.fc36.x86_64
CUPS printing system provides a portable printing layer for
UNIX® operating systems. It has been developed by Apple Inc.
to promote a standard printing solution for all UNIX vendors and users.
CUPS provides the System V and Berkeley command-line interfaces.
The cups-libs package provides libraries used by applications to use CUPS
natively, without needing the lp/lpr commands.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 36
-
cups-lpd-1.4.4-11.fc13.x86_64
The Common UNIX Printing System provides a portable printing layer for
UNIX® operating systems. This is the package that provides standard
lpd emulation.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 13
-
cups-lpd-1.5.4-25.fc18.armv6hl
The Common UNIX Printing System provides a portable printing layer for
UNIX® operating systems. This is the package that provides standard
lpd emulation.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 13
-
cups-lpd-1.6.4-2.lbn19.armv6hl
CUPS printing system provides a portable printing layer for
UNIX® operating systems. This is the package that provides standard
lpd emulation.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
cups-lpd-2.0.3-1.lbn19.x86_64
CUPS printing system provides a portable printing layer for
UNIX® operating systems. This is the package that provides standard
lpd emulation.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 19
-
cups-lpd-2.3.1-5.lbn25.x86_64
CUPS printing system provides a portable printing layer for
UNIX® operating systems. This is the package that provides standard
lpd emulation.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 25
-
cups-pk-helper-0.2.6-14.fc36.x86_64
cups-pk-helper is an application which makes cups configuration
interfaces available under control of PolicyKit.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 36
-
cura-4.13.1-5.fc36.noarch
Cura is a project which aims to be an single software solution for 3D printing.
While it is developed to be used with the Ultimaker 3D printer, it can be used
with other RepRap based designs.
Cura prepares your model for 3D printing. For novices, it makes it easy to get
great results. For experts, there are over 200 settings to adjust to your
needs. As it's open source, our community helps enrich it even more.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 36
-
cura-fdm-materials-4.13.0-1.lbn36.noarch
Cura material files.
These files are needed to work with printers like Ultimaker 2+ and Ultimaker 3.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 36
-
CuraEngine-4.13.1-2.fc36.x86_64
CuraEngine is a C++ console application for 3D printing G-code generation. It
has been made as a better and faster alternative to the old Skeinforge engine.
This is just a console application for G-code generation. For a full graphical
application look at cura with is the graphical frontend for CuraEngine.
Located in
LBN
/
…
/
Core Linux
/
BastionLinux 36
