Search results

ZenPacks.lbn.Asterisk-4.2.5_4.0.1-3.lbn13.noarch

This ZenPack monitors Asterisk VoIP server's using SNMP. The following MIB's are monitored: Active Calls 1.3.6.1.4.1.22736.1.2.5.0 Agent 1.3.6.1.4.1.22736.1.5.4.1.7.5 Bridge 1.3.6.1.4.1.22736.1.5.4.1.7.1 Calls Processed 1.3.6.1.4.1.22736.1.2.6.0 Current Channels Used 1.3.6.1.4.1.22736.1.5.1.0 IAX2 1.3.6.1.4.1.22736.1.5.4.1.7.4 Local 1.3.6.1.4.1.22736.1.5.4.1.7.10 MGCP 1.3.6.1.4.1.22736.1.5.4.1.7.8 Phone 1.3.6.1.4.1.22736.1.5.4.1.7.3 SIP 1.3.6.1.4.1.22736.1.5.4.1.7.6 USTM 1.3.6.1.4.1.22736.1.5.4.1.7.2 Woomera 1.3.6.1.4.1.22736.1.5.4.1.7.9 A full list of possible MIB's to extend your monitoring is available at http://wiki.squid-cache.org/Features/Snmp To use this zenpack, you'll need to install the asterisk-snmp server on your Asterisk box. You'll also want to either run up Asterisk as root to bind to port 161 as a standalone SNMP daemon (not recommended), or configure AgentX within your snmpd (recommended), using a configuration as follows in /etc/snmp/snmpd.conf: master agentx agentXPerms 0660 0550 nobody asterisk A full list of Asterisk MIB definitions can be found at https://wiki.asterisk.org/wiki/display/AST/Asterisk+MIB+Definitions

ZenPacks.lbn.Asterisk-client-4.2.5_4.0.1-3.lbn13.noarch

Configuration for any server being monitored by Zenoss/Asterisk

ZenPacks.lbn.Base-4.2.5_4.0.3-2.lbn13.noarch

Last Bastion Network product information into your Zenoss Server, and all the necessary monkey patches to your Zope environment.

ZenPacks.lbn.CouchDB-4.2.5_4.0.1-3.lbn13.noarch

CouchDB is a ZenCommand monitor for remotely gathering CouchDB server statistics. The following metrics will be collected and graphed for the LDAP Server: * Database Statistics o Reads o Writes o Open Databases o Open File System Files o Request Time * Daemon Statistics o Bulk Requests o Requests o Temporary View Reads o View Reads * Operations o Copy o Delete o Get o Head o Move o Post o Put * HTTP Statuses (20x, 30x, 4xx, 500) You can add CouchDB monitoring to the device within Zenoss by simply binding the CouchDB template to the device. 1. Navigate to the device in the Zenoss web interface. 2. Click the device menu, choose More then Templates. 3. Click the templates menu, choose Bind Templates. 4. Ctrl-click the CouchDB template from /Devices/Server to choose it. 5. Click OK. You will now be collecting the CouchDB Server metrics from this device.

ZenPacks.lbn.LDAPMonitor-4.2.5_4.0.2-1.lbn13.noarch

LDAPMonitor ----------- LDAPMonitor provides a method for pulling performance metrics from any LDAP server which implements the cn=Monitor standard. The monitor works by directly querying the LDAP server using the configured user dn and password credentials. Make sure that your LDAP server is available from your Zenoss console, you've enabled cn=monitor on it, and that the user has sufficient permissions to perform a 'cn=snmp,cn=monitor' search. The following metrics will be collected and graphed for the LDAP Server: * Operations o Add Entry o Modify Entry o Delete Entry o Search Entry * Bindings o Anonymous o Simple Auth o Unauthorised * Errors o Bind Security o Security o Other Errors o Failures * Response Time * Referrals You can add LDAP monitoring to the device within Zenoss by simply binding the LDAPMonitor template to the device. 1. Navigate to the device in the Zenoss web interface. 2. Click the device menu, choose More then Templates. 3. Click the templates menu, choose Bind Templates. 4. Ctrl-click the LDAPMonitor template from /Devices/Server to choose it. 5. Click OK. You will now be collecting the LDAP Server metrics from this device.

ZenPacks.lbn.SquidMonitor-4.2.5_4.0.2-1.lbn13.noarch

his ZenPack monitors Squid Proxy server's using SNMP. The following MIB's are monitored: cacheClients 1.3.6.1.4.1.3495.1.3.2.1.15.0 cacheCurrentFileDescrCnt 1.3.6.1.4.1.3495.1.3.1.12.0 cacheCurrentFileDescrMax 1.3.6.1.4.1.3495.1.3.1.13.0 cacheCurrentResFileDescrCnt 1.3.6.1.4.1.3495.1.3.1.11.0 cacheCurrentUnusedFDescrCnt 1.3.6.1.4.1.3495.1.3.1.10.0 cacheDnsSvcTime.5 1.3.6.1.4.1.3495.1.3.2.2.1.8.5 cacheHttpAllSvcTime.5 1.3.6.1.4.1.3495.1.3.2.2.1.2.5 cacheHttpErrors 1.3.6.1.4.1.3495.1.3.2.1.3.0 cacheHttpHitSvcTime.5 1.3.6.1.4.1.3495.1.3.2.2.1.5.5 cacheHttpHits 1.3.6.1.4.1.3495.1.3.2.1.2.0 cacheHttpInKb 1.3.6.1.4.1.3495.1.3.2.1.4.0 cacheHttpMissSvcTime.5 1.3.6.1.4.1.3495.1.3.2.2.1.3.5 cacheHttpNhSvcTime.5 1.3.6.1.4.1.3495.1.3.2.2.1.11.5 cacheHttpNmSvcTime.5 1.3.6.1.4.1.3495.1.3.2.2.1.4.5 cacheHttpOutKb 1.3.6.1.4.1.3495.1.3.2.1.5.0 cacheIcpQuerySvcTime.5 1.3.6.1.4.1.3495.1.3.2.2.1.6.5 cacheIcpReplySvcTime.5 1.3.6.1.4.1.3495.1.3.2.2.1.7.5 cacheNumObjCount 1.3.6.1.4.1.3495.1.3.1.7.0 cacheProtoClientHttpRequests 1.3.6.1.4.1.3495.1.3.2.1.1.0' cacheRequestByteRatio.1 1.3.6.1.4.1.3495.1.3.2.2.1.10.1 cacheRequestByteRatio.5 1.3.6.1.4.1.3495.1.3.2.2.1.10.5 cacheRequestByteRatio.60 1.3.6.1.4.1.3495.1.3.2.2.1.10.60 cacheRequestHitRatio.1 1.3.6.1.4.1.3495.1.3.2.2.1.9.1 cacheRequestHitRatio.5 1.3.6.1.4.1.3495.1.3.2.2.1.9.5 cacheRequestHitRatio.60 1.3.6.1.4.1.3495.1.3.2.2.1.9.60 cacheSysPageFaults 1.3.6.1.4.1.3495.1.3.1.1.0 cacheSysStorage 1.3.6.1.4.1.3495.1.1.2.0 cacheSysVMsize 1.3.6.1.4.1.3495.1.1.1.0 cacheUptime 1.3.6.1.4.1.3495.1.1.3.0 A full list of possible MIB's to extend your monitoring is available at http://wiki.squid-cache.org/Features/Snmp To use this zenpack, you'll need to enable snmpd in squid.conf: acl snmppublic snmp_community mysecretcommunity snmp_port 3401 snmp_access allow snmppublic all and proxy these through your hosts snmpd.conf: view systemview included .1.3.6.1.4.1.3495.1 proxy -m /usr/share/snmp/mibs/SQUID-MIB.txt -v2c -Cc -c mysecretcommunity localhost:3401 .1.3.6.1.4.1.3495.1

ZenPacks.lbn.SquidMonitor-client-4.2.5_4.0.2-1.lbn13.noarch

Configuration for any server being monitored by SquidMonitor

ZenPacks.lbn.ZopeMonitor-4.2.5_4.0.4-1.lbn13.noarch

ZopeMonitor ------------- ZopeMonitor provides a method for pulling performance metrics from a Zope Application Server (http://www.zope.org/) directly into Zenoss. It is necessary to first install the munin.zope eggs from pypi.python.org or our own repo at http://linux.last-bastion.net/LBN/up2date/monitor, and to have wget installed on this server. The monitor works by utilising ZenCommand to run wget on the local system - you do not need to make zope ports available through your firewall. The munin plugins do require a user with 'View Management Screens' access at the root however. This is configured using the zZopeURI zProperty of the device. This parameter uses Extended HTTP Authentication to specify user credentials, host and port. Note that the host is the hostname on the remote instance and should probably remain 'localhost' unless you've explicitly bound your Zope to a NIC. Note that the munin plugins expect to be installed on a Unix-like operating system with a /proc filesystem. The following metrics will be collected and graphed for the Zope Server. * Threads (only if you set up munin.zope on target - see code) o Free threads o Total threads * Cache o Total objects o Total objects in memory o Targe number * ZODB Activity o Total connections o Total load count o Total store count * Memory Utilisation o VmHWM - peak resident set size ("high water mark") o VmExe - size of text segments o VmStk - size of stack segments o VmPeak - peak virtual memory size o VmData - size of data segments o VmLck - locked memory size o VmPTE - page table entries size o VmLib - shared library code size o VmRSS - resident set size Once your Zope Server has the munin plugins installed, you can add Zope monitoring to the device within Zenoss by simply binding the ZopeMonitor template to the device. 1. Navigate to the device in the Zenoss web interface. 2. Click the device menu, choose More then Templates. 3. Click the templates menu, choose Bind Templates. 4. Ctrl-click the ZopeMonitor template from /Devices/Server to choose it. 5. Click OK. You will now be collecting the Zope Server metrics from this device.

ZenPacks.oie.KannelMonitor-4.2.5_3.0.0-3.lbn13.noarch

KannelMonitor ------------- KannelMonitor uses the nagios check-kannel plugin to retrieve input queue and delivery volumes from any Kannel-based SMPP server. Once your Kannel Server has the check-kannel plugin installed, you can add Kannel monitoring to the device within Zenoss by simply binding the KannelMonitor template to the device. 1. Navigate to the device in the Zenoss web interface. 2. Click the device menu, choose More then Templates. 3. Click the templates menu, choose Bind Templates. 4. Ctrl-click the KannelMonitor template from /Devices/Server to choose it. 5. Click OK. You will now be collecting the Kannel Server metrics from this device.