Modified items

All recently modified items, latest first.

snappy-1.1.0-2.lbn13.x86_64: Snappy is a compression/decompression library. It does not aim for maximum compression, or compatibility with any other compression library; instead, it aims for very high speeds and reasonable compression. For instance, compared to the fastest mode of zlib, Snappy is an order of magnitude faster for most inputs, but the resulting compressed files are anywhere from 20% to 100% bigger.

snappy-1.0.5-1.fc18.armv6hl: Snappy is a compression/decompression library. It does not aim for maximum compression, or compatibility with any other compression library; instead, it aims for very high speeds and reasonable compression. For instance, compared to the fastest mode of zlib, Snappy is an order of magnitude faster for most inputs, but the resulting compressed files are anywhere from 20% to 100% bigger.

smplayer-0.6.6-1.lbn13.x86_64: smplayer intends to be a complete front-end for Mplayer, from basic features like playing videos, DVDs, and VCDs to more advanced features like support for Mplayer filters and more. One of the main features is the ability to remember the state of a played file, so when you play it later it will resume at the same point and with the same settings. smplayer is developed with the Qt toolkit, so it's multi-platform.

smp_utils-0.97-2.fc18.armv6hl: This is a package of utilities. Each utility sends a Serial Attached SCSI (SAS) Management Protocol (SMP) request to a SMP target. If the request fails then the error is decoded. If the request succeeds then the response is either decoded, printed out in hexadecimal or output in binary. This package supports multiple interfaces since SMP passthroughs are not mature. This package supports the linux 2.4 and 2.6 series and should be easy to port to other operating systems. Warning: Some of these tools access the internals of your system and the incorrect usage of them may render your system inoperable.

smp_utils-0.94-3.fc12.x86_64: This is a package of utilities. Each utility sends a Serial Attached SCSI (SAS) Management Protocol (SMP) request to a SMP target. If the request fails then the error is decoded. If the request succeeds then the response is either decoded, printed out in hexadecimal or output in binary. This package supports multiple interfaces since SMP passthroughs are not mature. This package supports the linux 2.4 and 2.6 series and should be easy to port to other operating systems. Warning: Some of these tools access the internals of your system and the incorrect usage of them may render your system inoperable.

smokeqt-4.10.4-1.lbn13.x86_64: This package includes Bindings for Qt libraries.

smbios-utils-python-2.2.26-3.fc13.x86_64: Get BIOS information, such as System product name, product id, service tag and asset tag. Set service and asset tags on Dell machines. Manipulate wireless cards/bluetooth on Dell laptops. Set BIOS password on select Dell systems. Update BIOS on select Dell systems. Set LCD brightness on select Dell laptops.

smbios-utils-bin-2.2.26-3.fc13.x86_64: Get BIOS information, such as System product name, product id, service tag and asset tag.

smbios-utils-2.2.26-3.fc13.x86_64: This is a meta-package that pulls in the binary libsmbios executables as well as the python executables.

smartmontools-5.43-3.fc18.armv6hl: The smartmontools package contains two utility programs (smartctl and smartd) to control and monitor storage systems using the Self- Monitoring, Analysis and Reporting Technology System (SMART) built into most modern ATA and SCSI hard disks. In many cases, these utilities will provide advanced warning of disk degradation and failure.

smartmontools-5.40-3.fc13.x86_64: The smartmontools package contains two utility programs (smartctl and smartd) to control and monitor storage systems using the Self- Monitoring, Analysis and Reporting Technology System (SMART) built into most modern ATA and SCSI hard disks. In many cases, these utilities will provide advanced warning of disk degradation and failure.

smart-update-1.3.1-66.fc13.x86_64: Allows execution of 'smart update' by normal users through a special suid command.

smart-gui-1.3.1-66.fc13.x86_64: Graphical user interface for the smart package manager.

smart-1.3.1-66.fc13.x86_64: Smart Package Manager is a next generation package handling tool.

slv2-0.6.6-11.fc18.armv6hl: SLV2 is a library to make the use of LV2 plugins as simple as possible for applications. It is written in standard C using the Redland RDF toolkit. The Data (RDF) and code (shared library) functionality in SLV2 is strictly separated so it is simple to control where each is used (e.g. it is possible to discover/investigate plugins and related data without loading any shared libraries, avoiding the associated risks).

slv2-0.6.6-6.lbn13.x86_64: SLV2 is a library to make the use of LV2 plugins as simple as possible for applications. It is written in standard C using the Redland RDF toolkit. The Data (RDF) and code (shared library) functionality in SLV2 is strictly separated so it is simple to control where each is used (e.g. it is possible to discover/investigate plugins and related data without loading any shared libraries, avoiding the associated risks).

slf4j-1.6.1-1.1.lbn13.noarch: The Simple Logging Facade for Java or (SLF4J) is intended to serve as a simple facade for various logging APIs allowing to the end-user to plug in the desired implementation at deployment time. SLF4J also allows for a gradual migration path away from Jakarta Commons Logging (JCL). Logging API implementations can either choose to implement the SLF4J interfaces directly, e.g. NLOG4J or SimpleLogger. Alternatively, it is possible (and rather easy) to write SLF4J adapters for the given API implementation, e.g. Log4jLoggerAdapter or JDK14LoggerAdapter..

slang-2.2.4-4.fc18.armv6hl: S-Lang is an interpreted language and a programming library. The S-Lang language was designed so that it can be easily embedded into a program to provide the program with a powerful extension language. The S-Lang library, provided in this package, provides the S-Lang extension language. S-Lang's syntax resembles C, which makes it easy to recode S-Lang procedures in C if you need to.

slang-2.2.2-1.fc13.x86_64: S-Lang is an interpreted language and a programming library. The S-Lang language was designed so that it can be easily embedded into a program to provide the program with a powerful extension language. The S-Lang library, provided in this package, provides the S-Lang extension language. S-Lang's syntax resembles C, which makes it easy to recode S-Lang procedures in C if you need to.


	Copyright © 2000-2025 Corporation of Balclutha Inc. All rights reserved.