Modified items

All recently modified items, latest first.

cegui06-0.6.2-8.lbn13.1.x86_64: Crazy Eddie's GUI System is a free library providing windowing and widgets for graphics APIs / engines. This package contains the older version 0.6 for apps which cannot be easily ported to 0.7. As such this version has been build without additional image codecs or xml parsers.

cdrskin-1.2.4-1.fc18.armv6hl: A limited cdrecord compatibility wrapper which allows to use some libburn features from the command line.

cdrskin-0.7.0-1.fc13.x86_64: A limited cdrecord compatibility wrapper which allows to use some libburn features from the command line.

cdrdao-1.2.3-13.fc18.armv6hl: Cdrdao records audio CD-Rs in disk-at-once (DAO) mode, based on a textual description of the CD contents. Recording in DAO mode writes the complete disc (lead-in, one or more tracks, and lead-out) in a single step. DAO allows full control over the length and the contents of pre-gaps, the pause areas between tracks.

cdrdao-1.2.3-6.fc13.x86_64: Cdrdao records audio CD-Rs in disk-at-once (DAO) mode, based on a textual description of the CD contents. Recording in DAO mode writes the complete disc (lead-in, one or more tracks, and lead-out) in a single step. DAO allows full control over the length and the contents of pre-gaps, the pause areas between tracks.

cdparanoia-libs-10.2-12.fc18.armv6hl: The cdparanoia-libs package contains the dynamic libraries needed for applications which read CD Digital Audio disks.

cdparanoia-libs-10.2-9.fc13.x86_64: The cdparanoia-libs package contains the dynamic libraries needed for applications which read CD Digital Audio disks.

cdparanoia-10.2-12.fc18.armv6hl: Cdparanoia (Paranoia III) reads digital audio directly from a CD, then writes the data to a file or pipe in WAV, AIFC or raw 16 bit linear PCM format. Cdparanoia doesn't contain any extra features (like the ones included in the cdda2wav sampling utility). Instead, cdparanoia's strength lies in its ability to handle a variety of hardware, including inexpensive drives prone to misalignment, frame jitter and loss of streaming during atomic reads. Cdparanoia is also good at reading and repairing data from damaged CDs.

cdparanoia-10.2-9.fc13.x86_64: Cdparanoia (Paranoia III) reads digital audio directly from a CD, then writes the data to a file or pipe in WAV, AIFC or raw 16 bit linear PCM format. Cdparanoia doesn't contain any extra features (like the ones included in the cdda2wav sampling utility). Instead, cdparanoia's strength lies in its ability to handle a variety of hardware, including inexpensive drives prone to misalignment, frame jitter and loss of streaming during atomic reads. Cdparanoia is also good at reading and repairing data from damaged CDs.

ccrtp-2.0.2-2.fc18.armv6hl: ccRTP is a generic, extensible and efficient C++ framework for developing applications based on the Real-Time Transport Protocol (RTP) from the IETF. It is based on Common C++ and provides a full RTP/RTCP stack for sending and receiving of realtime data by the use of send and receive packet queues. ccRTP supports unicast, multi-unicast and multicast, manages multiple sources, handles RTCP automatically, supports different threading models and is generic as for underlying network and transport protocols.

ccrtp-2.0.2-1.lbn13.x86_64: ccRTP is a generic, extensible and efficient C++ framework for developing applications based on the Real-Time Transport Protocol (RTP) from the IETF. It is based on Common C++ and provides a full RTP/RTCP stack for sending and receiving of realtime data by the use of send and receive packet queues. ccRTP supports unicast, multi-unicast and multicast, manages multiple sources, handles RTCP automatically, supports different threading models and is generic as for underlying network and transport protocols.

ccid-1.3.11-2.fc13.x86_64: Generic USB CCID (Chip/Smart Card Interface Devices) driver.

ccache-3.1.8-1.fc18.armv6hl: ccache is a compiler cache. It speeds up recompilation of C/C++ code by caching previous compiles and detecting when the same compile is being done again. The main focus is to handle the GNU C/C++ compiler (GCC), but it may also work with compilers that mimic GCC good enough.

ccache-2.4-18.fc13.x86_64: ccache is a compiler cache. It acts as a caching pre-processor to C/C++ compilers, using the -E compiler switch and a hash to detect when a compilation can be satisfied from cache. This often results in a 5 to 10 times speedup in common compilations.

calf-0.0.18.6-7.fc18.armv6hl: The Calf project aims at providing a set of high quality open source audio plugins for musicians. All the included plugins are designed to be used with multitrack software, as software replacement for instruments and guitar stomp boxes. The plugins are available in LV2, DSSI, Standalone JACK and LADSPA formats. This package contains the common files and the Standalone JACK plugin.

calf-0.0.18.6-1.fc13.x86_64: The Calf project aims at providing a set of high quality open source audio plugins for musicians. All the included plugins are designed to be used with multitrack software, as software replacement for instruments and guitar stomp boxes. The plugins are available in LV2, DSSI, Standalone JACK and LADSPA formats. This package contains the common files and the Standalone JACK plugin.

cal10n-0.7.2-2.fc13.noarch: Compiler Assisted Localization, abbreviated as CAL10N (pronounced as "calion") is a java library for writing localized (internationalized) messages. Features: * java compiler verifies message keys used in source code * tooling to detect errors in message keys * native2ascii tool made superfluous, as you can directly encode bundles in the most convenient charset, per locale. * good performance (300 nanoseconds per key look-up) * automatic reloading of resource bundles upon change

cairomm-1.10.0-4.fc18.armv6hl: Cairomm is the C++ API for the cairo graphics library. It offers all the power of cairo with an interface familiar to C++ developers, including use of the Standard Template Library where it makes sense.

cairomm-1.8.4-2.fc13.x86_64: Cairomm is the C++ API for the cairo graphics library. It offers all the power of cairo with an interface familiar to C++ developers, including use of the Standard Template Library where it makes sense.

cairo-gobject-1.12.8-2.fc18.armv6hl: Cairo is a 2D graphics library designed to provide high-quality display and print output. This package contains functionality to make cairo graphics library integrate well with the GObject object system used by GNOME.


	Copyright © 2000-2025 Corporation of Balclutha Inc. All rights reserved.